H/E Heat Exchanger Chiller Tube Copper Bend Brass Bar Forged Copper Per-Insulated Copper Tube Welding Melt Materials HomeProduct   Evaporating tube Chiller Tube   -On the evaporating tube surface there are high density of pore which are interconnected by tunnels below the surface. The structured surfaces exist more nucleation sites and allow the liquid to flow into tunnels quickly, thus it enhance the boiling heat transfer¡C -Its heat transfer coefficient is about 4 times higher than a plain. -The evaporator with the structured surfaces tube can reduce the volume and metal of evaporator. It is evident that the production cost will cut down. -It will reduce energy consume when condenser is operating. Print | 2008/04/23 | view : 4359 Item No Nominal Dimensions Finned section Dimensions Inside Dimensions Outside Dim Number of Fin per inch Wall thickness Outside Dim Inside Dim Wall thickness Fin Height Number of Ridges Depth of Ridges Helix Angle 1 19.05 1.24 51 18.77 17.25 0.64 0.76 34~38 0.35 45° 2 19.05 1.32 51 18.77 17.39 0.70 0.69 34~38 0.35 45° 3 25.4 1.18 46 25.25 23.75 0.64 0.75 38~47 0.4 45° 4 19.05 1.35 46 18.77 17.27 0.69 0.75 38~47 0.4 45° 5 19.05 1.13 46 18.85 17.59 0.57 0.63 38~47 0.4 45° * Other sizes are manufactured on request. About UsNewsOur ProductProduct GuideNew ProductServiceHuman ResourceContact UsHome

Chung Chen Metal Industry Co., Ltd. Copyright© 2018 All Rights Reserved. TEL:886-3-385-1823 FAX:886-3-385-1475 119~1, Ming Sheng Road, Tayuan Hsiang, Taoyuan Hsien, Taiwan, R.O.C.