Evaporating tube
Chiller Tube
line
 
-On the evaporating tube surface there are high density of pore which are interconnected by tunnels below the surface. The structured surfaces exist more nucleation sites and allow the liquid to flow into tunnels quickly, thus it enhance the boiling heat transfer¡C
-Its heat transfer coefficient is about 4 times higher than a plain.
-The evaporator with the structured surfaces tube can reduce the volume and metal of evaporator. It is evident that the production cost will cut down.
-It will reduce energy consume when condenser is operating.
line
 
PDF Download:
Get information
iconPrintspacer | spacer2008/04/23spacer |spacer view : 4376
Zoomin

詳細規格
Item No Nominal Dimensions Finned section Dimensions Inside Dimensions
Outside Dim Number of Fin per inch Wall thickness Outside Dim Inside Dim Wall thickness Fin Height Number of Ridges Depth of Ridges Helix Angle
1 19.05 1.24 51 18.77 17.25 0.64 0.76 34~38 0.35 45°
2 19.05 1.32 51 18.77 17.39 0.70 0.69 34~38 0.35 45°
3 25.4 1.18 46 25.25 23.75 0.64 0.75 38~47 0.4 45°
4 19.05 1.35 46 18.77 17.27 0.69 0.75 38~47 0.4 45°
5 19.05 1.13 46 18.85 17.59 0.57 0.63 38~47 0.4 45°
* Other sizes are manufactured on request.

line
BACK
 
START PRINTStart Print
spacer

Copyright © 2008 Chung Chen Metal Industry Co., Ltd. Tel : 886-3-385-1823 spacerFax : 886-3-385-1475
Address : 119~1, Ming Sheng Road, Tayuan Hsiang, Taoyuan Hsien, Taiwan, R.O.C. E-mail:ccmymc@ms10.hinet.net